Selleys Ezi Press No More Gaps - Multipurpose 170g

Selleys Ezi Press No More Gaps - Multipurpose 170g

Regular price $10.60

Selleys Ezi Press No More Gaps Multipurpose filler is the NEW easy to use application system that does not require a caulking gun. Simply apply at the press of a lever. Perfect for filling gaps around the home such as around window frames.

Key Benefits

  • No caulking gun required
  • Easily applied with a press of a lever
  • Flow control for precise application and finish at the press of a lever


  • Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer. Has greater than 300% elongation/stretch and up to +/- 15% movement capability.
  • Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
  • A smooth flawless finish and minimal shrinkage from the sides of the gap or joint, to give you the professional look.
  • Can be painted over with both water and oil based paints, after the surface has skinned. (Approximately 3 hours after application). Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
  • Is formulated for long term resistance to cracking and crumbling.
  • Is water based, so can be cleaned up easily and quickly with water.
  • Will not stain building materials.
  • Has good resistance to weathering.

    Where can this product be used?

    A gap where movement occurs such as:

    • Between window and door frames and the wall
    • Along skirting boards
    • Around cornices
    • Between benchtops and tiles which are not exposed to water. Use SELLEYS Wet Area Silicone Sealant for sealing around bathtubs, kitchen sinks and in shower recesses.
    • In corners or between walls & ceilings.
    • Between cabinets and cupboards.
    • Around air conditioning vents and the ceiling.
    • Where shrinkage or movement has caused rigid fillers to crack.
    • Gaps with the maximum width of 25mm & depth of 12mm.
    • Is not recommended where significant joint movement occurs, such as gaps between tongue and groove boards or weatherboard overlaps and areas of continous water immersion eg ponds.
    • Is not suitable for application at below 5°C.


    You may also like